狂犬病狗牌挂坠

RABIES DOG TAG HOLDER

2023-08-19 14:13:23

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a work in progress of course. The goal is to encase the 'rabies' tags that we need to have on our dog collars. Once this is working, I'd use the same enclosure to print/engrave the dog's name/addr/phone on the back-plate.

Thus combining two tags into one. And no more "clanging" noises.

Dimensions of the OVAL Rabies tag is an oval 35mm by 28mm; So I made the bottom layer 37x30 to give a tad bit of wiggle room; the top layer is smaller by 1mm, to prevent it from coming out, but it takes some force to get it in, since it requires the material to expand (a better design might build in some gaps to allow it to be more playable).

NOTE: this is the first draft.... currently it works, but my first print used a thick layer height, and the 3d model is not well contoured, and so the point where the two shapes join is weak (only overlapping by one half millimeter... so that point is weak and has easily broken when pushing in the tag.

Next steps are to make that more contoured; and reduce the height of it so it is more seamless with the size of the tag. Currently it's pretty thick and doesn't fit well into the typical collar hooks.