Talon磁适配器（用于长距离）（基于Slug的设计）
Talon Mag Adapter for Longshot (Based on Slug's)
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
NOTE: I'm still updating and adding new (and better) versions of this thing here: https://www.printables.com/model/562291-talon-mag-adapter-for-generic-nerf-full-length-mag
- Better fit, sturdier, less filament, bungee cord compatibility etc.
- I'm only keeping this here for continuity, my ongoing work is on printables
Altered slug's adapter to fit into my worker kit half dart longshot.
To preserve strength I had to tighten down some space to accommodate the side slots, resulting in likely talon incompatibility. Mag release also had to be trimmed down slightly as the shell was pressing on it, causing the mag to drop too easily while "locked".
This was a PETG print on my old modified Geeetech i3 Pro B, hence the poor quality, I have not yet tried printing this on a good printer.
Tags
License
Talon Mag Adapter for Longshot (Based on Slug's)
by J_yang is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
低多边形皮卡丘 - 多孔和双孔挤出版本2023-03-26 -
飞行模拟器简易脚部2023-03-27 -
Maker钱包V2：卡片式钱包（现金/硬币存储）2023-05-02 -
手机和平板支架套装2024-03-17 -
120毫米蜂窝滑板轮，适用于38毫米轴（未测试）2024-04-23
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
红米手表4号充电基座2024-03-15 -
GTA 5 大地图模型2024-04-21 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29
最新模型
-
模块化笔筒链2025-07-19 -
弹弓HGX-FRAME V1A2025-07-18 -
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
用于加长杆的戴森配件支架2025-07-17 -
Yeezy Foam Runner Adidas运动鞋2025-07-16