Kobalt 24V 弦修剪器适配器

String Trimmer Adapter - for Kobalt 24-Volt

2023-08-19 17:33:05

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Adapter for using a Echo Speed-Feed 400 String Trimmer head on a Kobalt 24-Volt String Trimmer Head.
It is indexed to the trimmers shaft making it easier to hold the motor in place when tightening the nut to secure the Speed-Feed Head.
I have been using the Speed-Feed head on my Kobalt trimmer for about a year now. There has always been a large gap above the head. The original head had blades to draw in air for cooling the motor and keeping grass out. This spacer incorporates some of that thinking.
The spacer is 4mm thick with the blades at a 6mm length.
I would infill at least at 75%.
The indexed center may need to made wider with a jeweler's file.

Instruction video:
https://youtu.be/4SsTOAtIGzc

Note: the video does not have this installed yet, I just finished designing them. I will update when I have printed versions installed.