安益立克 Kobra Neo ADXL345 X轴安装架

Anycubic Kobra Neo ADXL345 X-axis mount

2023-08-19 20:40:01

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

ADXL345 X-Axis and Y axis mounts for the Kobra Neo

There's another mount by Applepie2 but it doesn't fit the accelerometer I have which I think seems more commonly available (e.g. https://www.amazon.co.uk/dp/B09M6MSF7J)..

There are screw mounts for the board, but the fit is tight so that friction fit is plenty solid enough (maybe sand the edges of your board down if it's too tight).

The X axis mount is designed with a kind of hook to grip the top screw head, then only the single screw below is needed to attach it to the printhead.

The Y axis mount you just print on the bed, and keep your bed warm so it sticks.

More info on measuring resonances here: https://www.klipper3d.org/Measuring_Resonances.html