纸巾盒持有者

Tissue Box Holder

2023-08-19 20:53:22

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Easy to print. No supports needed.

Inspired by Teiwaz83 https://www.thingiverse.com/thing:3721070
and simon186 https://www.printables.com/model/319781-tissue-box-holder

You can customize pretty much everything about this holder, right down to the mount hole size. You can change the shape (number of sides) of the decorative holes. Select big or small fillets on the front. And of course set the size of the box.

When measuring your box, take "sloppy" oversized measurements. You don't want a "perfect" fit. Give yourself a few extra millimeters in all dimensions so the box will drop in nicely. Especially keep in mind the size of your mounting screw heads.

Includes mount holes for both wall-mount and shelf mounting. Obviously, double-sided tape mounting is always an option.

NOTE: The photos above and the GCODE file have the small fillet, the STL file has the big fillet.

ALSO NOTE: I just realized the online Customizer does not appear to support boolean variables (checkboxes). So it does not show the "use big fillet" option under Decorations. Using the big fillet is the default. If you want to use the small fillet, you will have to download the .scad file and open it in OpenSCAD.