WLtoys顶部支架更换（使用6mm管道）124017 / 124019 / 124007 / 144001 / 144010

124017 / 124019 / 124007 / 144001 / 144010 WLtoys top brace replacement (using a 6mm tube)

2023-08-19 22:27:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

WLtoys顶部支架更换（使用6mm管道）124017 / 124019 / 124007 / 144001 / 144010

Summary

I created these so I could replace the stock top deck with something stiffer and smaller. Allows better fitment of larger batteries.

I printed mine in Carbon PLA using a 0.4 nozzle, 0.2 layer height, 8 top and bottom layers, 7 walls and 30% infill. You'll need supports for the spur gear cover at least.

For a 1/12 scale WLtoys buggy, the 6mm aluminium tube is 164mm long. This isn't confirmed but online it says the 144001/ 144010 has a wheelbase 46mm shorter than the larger buggys. Therefore, their tube would be 118mm long. measure this first though! Also, you dont have to use aluminium. You can use anything (carbon fibre would be good). This is glued in at either end using 2 part epoxy.

26/8/23 update - it seemed to survive the skate park!