时光之主钟表面板

Justin Time Clock Face

2023-08-20 02:29:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I printed the Justin In Case model by sottto for a buddy and he requested a Justin Time. I searched around and couldn't find one so I put this together.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 v2
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.28
Infill:
20%
Filament brand:
Generic
Filament color:
White / Black
Filament material:
PLA
Notes:
I printed this with a 0.6 mm nozzle.

Changing colors mid print is easy! I used Cura to slice this print, and an Ender 3 V2 with the latest stock firmware.

Note: Older Ender 3 V2 firmware will not work. You must update to the latest version.
- Choose the layer you'd like to change colors
- In Cura, go to -> Extensions -> Post Processing -> Modify G-Code
- On the left, click Add a script
- Click Filament Change
- Where it says Layer, enter the layer number you'd like to change filament
- Print
- When the printer arrives at the layer for color change, it will beep slowly then quickly, then eject filament. The hot end will cool off and the bed will remain hot.
- Swap the filaments. Click to resume printing. Remove the excess that's extruded before printing begins.
- Congratulations! You've just completed a multi-color print!