Folding Mount for Bicycle Brake Light
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Folding Frame for Brake Light
Made a folding rack for my bicycle brake light. Snap fit. Folds down for use, and up for transport.
Rear Mounting Plate Bending Guide
The rear mounting plate I printed flat, then heated with a kitchen blowtorch and bent by hand.
- Draw a straight line 1in/25mm from the edge of the plate on both sides.
- Lower the plate into a benchtop vice and secure such that the marked line is flush with the top of the vice.
- Use the blowtorch to heat the PLA to it's malleable point. Note that this does not take long, do not set the piece on fire.
- While the PLA is warm (& still secured in the vice), bend it 90 degrees. Hold until it cools enough to "set", you may wish to blow on it to speed cooling.
- Repeat the clamping, heating, and bending process with the other side.
OR print the mounting frame that's made such that you don't have to bend it, this is the
"no bend" file.
Takes #8 screws
Takes US--sized #8 screws & nuts on the light plate mounting. 4mm screws should also work.
Post Your Makes
I always love to see people's posted makes, really makes my day!
My Other Project
Be sure to check out my collection of cups, mugs, & more here at WeCanDrinkTogether.com
Custom Section
Tags
License
Folding Mount for Bicycle Brake Light
by beer2bolts is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
热门推荐
-
Hollow Clock 2: 静谧与流畅2023-03-26 -
丰田Corolla AE86座椅倾斜手柄2023-05-12 -
钢铁系列 Arctis 3 3.5毫米耳机插头扩展支架2023-05-21 -
Makita吹风机与Leafield C7或D7阀门适配器，改进型底环2023-06-14 -
手表支架2024-05-05
最热下载
-
红米手表4号充电基座2024-03-15 -
Arduino或5V继电器控制板固定架2024-04-02 -
王国之泪TOTK光龙塞尔达传说2024-04-20 -
Woods Mower 30922 护盾保持者2024-04-24 -
泰坦电视核心升级，升级版泰坦巨人核心2025-07-16
最新模型
-
FLsun SR HGX Bambu直接驱动挤出机2025-07-18 -
曼诺拉还是小物件？2024-05-08 -
阿普丽亚油回收器3D模型2024-05-06 -
支撑结构盖板与延伸部分2024-05-06 -
橡胶储物棚盖支撑臂模型2024-05-06