Wiggly Smi - 原地打印可动态结构的灵动白鲸玩具

Wiggly Smi (Print-in-Place Articulated Fidget Beluga)

2023-08-20 03:09:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Behold! Wiggly Smi! The articulated fidget beluga! I modeled him after one of my favorite childhood stuffed animals. Smi is short for Smilie :)

Wiggly Smi was inspired by the really popular fidget slugs! I wanted to make my own version that is special to me. Enjoy your new wiggly friend!

Wiggly Smi is for personal use only, no commercial use. Thank you!

UPDATE: I have added files for each of the individual segments by request! If one segment breaks or you're worried about him fusing (or you just want to make him really big), you can print the pieces one at a time. Obviously this would mean he wouldn't exactly be print in place anymore, but you should be able to pop the joints into place fairly easily. Please note that I have not personally tested printing him piece by piece, so results with this method may vary.

Print Settings

Printer brand:
AnkerMake
Printer:
AnkerMake M5
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
20%
Filament brand:
Polyterra
Filament color:
White
Filament material:
PLA
Notes:
I have added custom supports for his mouth, so please do not use supports in your slicer. He is a rather delicate print, so it might be beneficial to slow down your print speed a bit if you're worried about him failing. Also, please use a brim as your buildplate adhesion setting. Without one, Wiggly Smi will wiggle off the bed.

The individual segment files are optional; they are there if you want to print him piece by piece. See the summary for more information on this.

Post-Printing

When he is done printing, remove the brim and gently rotate his joints to loosen them up! You can clip off his mouth supports with clippers and sand the area as well. If one falls out you can gently pop it into place. You can paint his face if you like or leave it unpainted.