内置存储螺丝刀

Screwdriver with Built-in Storage for Bits

2023-08-20 07:22:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Disclaimer

This is model currently not yet finished. I am still testing the fit and tolerances, and therefore all the parts mentioned may not be available to download yet, and pictures might not have been updated. Please message me or remix on your own if you have any suggestions.

Note

This is a remix. It is heavily inspired by Cheff4K's "Screwdriver Tool, With Built In Storage". The design by Cheff4K was great, and motivated me to improve the design based on my preferences. The files available for download here have been completely remodelled because of difficulties using the original fusion file.

About

This screwdriver has built in storage for 6 normal-sized bits. It also has a rotating handle. This model is meant to be used with magnets, but some parts can be used without. Parts for will be available to download for both types.

The parts that (can) use magnets are:

the six-bits holder inside the body, to keep it closed. Since the handle is rotatable, it can not use a simple twist to lock/unlock mechanism, therefore a magnet is required for this parrt.
the main, front bits holder, to change bits without a extended bit holder. A version without magnet will be available, that only uses friction to fit the bits.
the head/the part that holds the bits in use, so it can be exchangable for other types/sizes of bits. For example 4mm bits.

The maximum amount of magnets that can be used is 5. Two for the inside storage/bit holder,
two for the head to mount it to the body, and one for the head to mount bits to it.

The models are designed for magnets with a diameter of 10mm and a thickness of 2.5mm, excluding tolerances. If you have other sizes of magnets, you can either change the sizes in the fusion file, or message me and I might be able to customize the parts for you. The parameters in fusion are called "MagnetDiameter" and "MagnetThickness".

To Print

There are six parts to print:

The "Head", which is the part that hold the bit in use.
The "HeadMagnetSpacer", which is a spacer to be put between the two magnets in the "Head".
The "Body", which is the main housing and handle.
The "BitHolder", which is the part that holds all the bits on the inside.
The "RailStop", which is a stopper for the "rails" inside of the body, to stop the "BitHolder" from being able to slide out.
The "Cap", which consists of two parts, but are meant to be printed in place on or around each other.

Assemble

Description is not yet done.

Print Settings

Printer:
Bambulab X1C
Rafts:
No
Supports:
No
Notes:
None of the parts require support.

Brim can be used for the "Head" and the "Body".

The "Cap" consists of two parts, that are printed in place. The parts might stick to each other after print, but can be easily made seperate when put on the "BitHolder" and twisted.

The models in the pictures are printed at a resolution of 0.12mm with 100% infill.
100% infill might not be neccessary for all parts, but it is recommended for the bits holder.