沃罗尼挂钩板架

Voroni Shelf for pegboard

2023-08-20 09:08:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I've been trying to put everything on pegboards lately, and this is a shelf for me to put my powder on at my reloading station.
It's deep enough for a common board (I.E. 1x6) at 5.5" deep and is 14 1/2" wide (14 3/4" including the brackets). I had tried the shelf at 1/4" high, but experienced sagging, even with the center bracket, so I went with 1/2" high and it seems to be holding fine.
(for reference, that's an 8lb and 1lb container on the shelf.)
The right and left brackets have lips on the side to prevent the shelf from sliding out. Center bracket has only the front lip.
I made some spacers to slip over the peg nubs to level the shelf.