Enders 3 V2型号顶部安装线路器感应器支架

Ender 3 V2 top mount Filament sensor holder

2023-08-20 10:42:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Made this for my Ender 3 V2 to top mount a Creality filament sensor. I used the original creality M3 screws for the filament sensor and then 2 M4 x 16mm screws for the swivel joint. You need to adjust the tension on the 2 screws so it positions it correctly and allows for some movement.

Updated the Base to have a screw to lock into the top rail and also the Swivel to give it an angle from the top rail.

Added the Small filament sensor plate for the Ender S1 series filament sensor which I found was a much better and smoother filament sensor.

Uploaded Base V4 so it raises the Filament sensor Higher. This will need supports when printing.