TX02固定盒，专为FPV飞行器设计

TX02 Mount Case for FPV Planes

2023-08-20 14:15:05

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Hi all!
This is a protection case i designed for TX02 AIO FPV cameras, I like to mount this tiny FPV system on my RC airplanes, but they're very fragile.

If you'd like to do use this be aware that:

The camera is supposed to be glued to the case, two drops of hot glue are enough to avoid shaking inside the case.
I desing this as a mount so what's missing? Adhesive velcro. I use it a lot for my FPV cameras and works great, very versatile. You might think that it might wobble but it doesn't! Try it yourself!
There's a 2mm hole on the bottom, that's mainly a reference for me. Once the case is printed I drill a 2.5mm hole, then with a tapping bit i turn it into a 3mm threaded hole. So you can join the 2 parts without glue with one simple M3 screw.
There's a hole on the side, this is for the power supply wires.
The antenna is very fragile. Get some UV glue and reinforce the soldering with lots of it. Thank me later :P

Video preview: https://youtu.be/6RvG5KCXGcw