Virpil CM3防锈装置 - MSFS ATR72模拟飞行
Virpil CM3 detent for MSFS ATR72
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Hi,
i adapted my previous designs to make a suitable version for ATR 72
Print with supports, may be harder to clean. i did not try without supports.
Here's how i configured my joystick in the plane.
Physical max idle mapped to idle ( no reverse ) , i use buttons to trigger reverse
The 1st notch is the Flight Idle ( to be mapped in the ATR tablet , the 2nd will land on the end of green graduation ( no need to map )
The third needs to be mapped to Notch
the last to Ramp.
Enjoy.
Fusion 3d file provided if u need to tweak ( not the best editable file , but i'm too lazy to redesign it :D )
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:Doesn't Matter
- Supports:Yes
- Resolution:0.2mm
- Infill:Sparse 15% Gyroid ( superslicer 24)
Post-Printing
Remove supports ( i used a flat screw driver to push the supports inside the screw hole )
Then sharp tools to clean a bit.
Tags
License
Virpil CM3 detent for MSFS ATR72
by Cerppo is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
最新模型
-
青蛙闻牛2024-05-08 -
美国长老教会十字架3D模型2024-05-06 -
茶几腿2024-05-06 -
支撑结构盖板与延伸部分2024-05-06 -
侧边除冰风口（适用于Scirocco MK1）2024-05-06
最热下载
-
精灵族森林守护者A2023-03-26 -
桌子反面的抽屉2023-03-26 -
ZTE MU5001 上位电容器2024-01-10 -
泰坦电视核心升级2024-05-02 -
厨房水槽滤网过滤器2025-06-05