Ender3加直接泵出器PTFE持有者
Ender3 + direct extruder PTFE holder
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
After upgrading Ender 3 to direct extruder I'd found a problem with filament feeding. I wished to use printer's stock PTFE tube and also to keep the original filament feeding technique. So you can evaluate my solution - the small printed part is placed instead of stock Bowden and it's fixing the second end of the stock PTFE tube as well as wires cable.
P.S. I've attached also FreeCAD source to enable adjusting sizes (gaps and so on) to specific printer.
Print Settings
- Printer brand:
Creality
- Printer:
Ender 3
- Rafts:No
- Supports:Yes
- Resolution:0.2
- Infill:60%
- Filament brand:
НИТ
- Filament color:
Black
- Filament material:
PETG
- Notes:
100% fan except first layer. Supports are necessary but from build plate only, everything else is printing fine. I've printed using a brim 7mm.
Tags
License
Ender3 + direct extruder PTFE holder
by Lehin is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
三维网格彩蛋模型2025-06-18 -
isobaric 等压型低音喇叭 V1.0 模型2023-03-26 -
山羊/精灵族/魔鬼角 - 可拧上或穿过发丝2024-04-05 -
蚂蚁试管巢穴 - 试管通道 - 阿芙罗狄特巢穴2024-04-28 -
小米智能手环8Pro充电座2024-04-29
最热下载
-
车身RC 1/10 全套2023-03-26 -
Delta设置校准为Klipper2023-04-23 -
Gun4IR 光枪侧边按键改装模块｜3D打印机械开关支架2023-05-23 -
拒绝的手势2024-04-19 -
Neptune 4 / 4 Pro Cura 切片配置文件与使用教程2024-05-02
最新模型
-
模块化笔筒链2025-07-19 -
泡泡底拖鞋2025-07-17 -
高跟鞋鞋架2025-07-17 -
KALYRA PRIME - 一姐 适合桌面游戏和收藏家的科幻女英雄。2025-07-15
