Garrett AT 金属探测器升降架

Riser for Garrett AT Metal Detector

2023-08-21 04:30:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This spacer allows you to access the battery compartment without hitting into the pole. I can confirm it works on all the Garrett AT models, I'm not sure about others. You can use the stock screws. I printed this for my dad at 0.3mm, 15% Gyroid Infill. It crunches a little while tightening, but is secure. If you are worried about the durability print at 0.2mm with 25% Gyroid Infill. Use supports, I used tree.