弹性手镯

Elastic Bracelet

2023-08-21 04:43:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This bracelet consists out of an inner and outer ring of hexagons, which are connected via unsupported pole strings
this structure allows high flexibility and cool looking surface ;-)

1K-Print: Bracelett2 v12.stl
test was printed at 60% scale
50-70% schould work, depends if the pole threads are big enough to print
printed with TPU Ninjaflex
no Support
you have to sepparate these hexagons with your mini wire cutter
which is a little fiddly

2K-Print: Bracelett2InnerSupport+ Outer Support+ _2K_without support
NOT testet
dual filament print not tested yet
align the three parts in cura via right click "center selected"