现代化黄色道路滚筒二号模型

Yellow Road Roller Modern Version 2 with movements

2023-08-23 17:32:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Upgrades From Version 1

1) The Body Panels can be now printed seperately and then joined with main body thus the distinct color combination can be achieved without painting.

2) The back panel engine cover is now operated with a Hinge Mechanism, earlier it was take off type. There is also a lever to hold the tilt position of panel.

3) Interference issues have been rectified.

4) Strengthened Body

5) Changes to Wheels.

6) Better Labelling for screw holes.

7) I recommend to print a Engine model and place it inside the engine room so that it is visible when the engine cover latch is opened.

There are Four ways to print this.

1) As single piece:- Please download STL file but there wont be any movements.

2) Mutltiple Prints with body panel seperate :- THE PREFERRED WAY. Please download “Yellow Road Roller Modern Version 2 Combined with body panel seperated.3mf” file. The body can be printed in seperate colors and glued on. To simplify the aligning of panels, every panel has its own cavity cut in the body. You can use the same 3mf file as manual for assembling. You may need screws and or glue to complete assembly.There are pin to be printed for movements which can be sustituted with nuts or bots. Lock pins have also be not provided. I have been using a small piece of filament itself as lock pins. Also you may have to scale up the model to get the full play but make sure you dont lose the wall thickness and tolerance.

3) Multiple Pieces with merged body panels:- Please download "Yellow Road Roller Modern Version 2 Combined.3mf". In this the body panels are merged with the main body. Even when the distinct look can be attained by painting.

4) Full Dismantled :- Download 3mf file with Full_dismantled.3mf. Inteference issues are expected as this is the pre processed file. Advise only expert makers to use this. Print at your own risk. Also make sure when printing text seperatly, scale it down to 95% so that it will fit without any issues

Both the Back Wheels have been made hollow to ensure efficient printing.

Supports should be provided as required.

Appreciate the makes uploads.Open for suggestions.