Bambulab ESP32 LED控制器
Bambulab Esp32 LEDController
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Bambulab Esp32 LEDController
See your Printer Status anywhere if there is Wlan and a 5V Powersource!
Also there is a Webpage where you can see the Printerstatus and also control it!
NEW! Added OBS overlay Website to Display the Printer Status in OBS with this Device.
Use pre defined Color's on different Printer Stages or just configure yourself.
For X1/C use Firmware equal or greater than 01.06.01.00.
You need: Esp32 and 6 WS2812B Leds and optional 3x 10x2mm Magnet.
If you want to insert Magnets: Pause at Layer 15 and insert Magnets.
Firmware and more informations can be found at Github, click to go there.
If you need help, have questions or want to collaborate, please feel free to join my discord
Tags
License
Bambulab Esp32 LEDController
by vr6syncro is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
联系我们
最新模型
-
团队精神骷髅标志展示架2024-05-08 -
花环戒指2024-05-08 -
基础火箭模型2024-05-08 -
Taco Bell Chess Set: Queen Piece 3D模型标题2024-05-08 -
144001 后部扰流板2024-05-06
最热下载
-
精灵族森林守护者A2023-03-26 -
Toyota 22RE发动机扩展套件2023-03-26 -
Arduino或5V继电器控制板固定架2024-04-02 -
3D模型标题1：kp3s orca slicer2024-04-07
