Molle 平行式可锁定夹具

Molle parallel lockable clip

2023-08-24 02:03:52

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A quick and easy Molle attachment that binds two straps together or can be used as a locked paracord or shot cord point. I designed it because I wanted to attach a belt type knife pouch to my camping / go bag sideways.

Print standing on its side with no supports and use a razer blade in the gaps to seperate them. I printed PLA to test and it was OK. The final ones I am using are printed in PETG for better strength and flexibility.

To put them on the bag just pry / pull them open enough to put the straps in place and then push them on. It's takes some strength but that means they shouldn't come off easily. After they are on put a piece or paracord, screw, or whatever you want through the hole to lock. Even without the locking they are not likely to come off easily.

The other thought is that you can add a raised monogram or symbol on them and just use them as a tag.