工牌

Nametag

2023-08-24 02:57:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a foldable nametag. Folded its just like a sheet of 7mm thickness. Opened it's standing on its own.
You can make a colorshift in 2mm height for a good contrast of the name.

The hole in one part is horizontally in the middle and 15mm from the hinge. Its dimensions are 160mm x 30mm.

The name is on the first part looking downsides (see picture).
You can easily place a name/text of your choice with the prusaslicer and it should not have a thickness over 2mm. I recommend 1mm.

The part with the hole needs supports.

Print Settings

Printer brand:
Anycubic
Printer:
Kobra
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
5
Filament brand:
Anycubic
Filament color:
white and black
Filament material:
PLA
Notes:
Disclaimer: It's printed with the Kobra 2, but Thingiverse doesn't have it rightnow.