RPi Zero Original 情况跳板适配 GPIO 头及摄像头盖
RPi Zero Original Case Jumper for GPIO header + Camera Lid
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I have a raspberry pi zero W with pin headers soldered in. This prevents the camera lid from fitting, since the pins touch the back of the camera.
I managed to design a jumper that goes in between the base and the camera lid for the original rpi zero case to give it enough space for nothing to be touching.
I think the tolerances can be lowered a bit, but I ended up using the kind of double tape you find in smartphone screens to keep it together.
thanks a lot to Voodle for his original case model. Here is the link
Tags
License
RPi Zero Original Case Jumper for GPIO header + Camera Lid
by agilator is licensed under the Creative Commons - Attribution license.
猜你喜欢
联系我们
最新模型
-
Prime Line C1254 阳台门钥匙锁稳定器2024-05-08 -
小型注脂枪补充装置2024-05-08 -
Tomy赛车驾驶舱部件2024-05-08 -
T 型支撑结构适配器2024-05-06 -
并列夹紧器2024-05-06
最热下载
-
1:144 比例星际飞船模型2023-03-26 -
红眼鳄鱼蜥蜴可拼合骨架3D模型2023-03-26 -
Toyota 22RE发动机扩展套件2023-03-26 -
7英寸HDMI显示器-B外壳2024-04-01 -
远投笼2024-04-06