手机支架（适配1.25英寸眼镜片）

Smartphone holder for Telescope (1.25in eyepiece)

2023-08-24 04:57:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The adapter that came with the telescope was too heavy and hard to setup so I took the phone clamp and replace the part that aligns the lens with the camera for this adapter.

The diameter of the eyepiece my telescope uses is 34mm and the actual lens hole is 13mm . (I'm new to this hobby so I don't know if this is a standard measurement for eyepieces or if it's just for my particular case, so take that into consideration).

I printed the adapter using supports on the long section, I know that it's more material going to the trash but I thought it will be better to have rough edges in that section instead of the one that attached to the lens.

Anyway, hopefully this is helpful for someone out there.