简化版颜色化模具用于PET条带

Minimal colorization jig for PET strips

2023-08-24 05:24:21

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a very minimal jig for sliding a cut PET bottle strip through to colorize it before turning it into filament with a pultrusion machine. Just hold a wide-tip permanent marker against the strip through the window and pull. The opening is designed to admit strips that curl from cutting the bottom or top segment of a bottle.

The jig prints without supports in a 45° orientation as in the STL file. Provided STL allows strips up to 10mm wide and 0.7 mm thick. If you need a wider opening or a more constraining path for narrower strips, the customizer/OpenSCAD source file can be used to produce variants.

Usage demo video: https://youtube.com/shorts/rYKTfnku9vg