20毫米锅盖混搭设计
Pot lid 20mm remixes
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
The pot lid holder hooks are brilliant and have, for Toby effort, made the kitchen much easier to work with.
The original is a great design that securely hold lids up to 15mm deep. A recent addition pot has a slightly domed glass lid, which pushed on the hook tips just enough to cause fatigue delamination and failure.
I've made blkhd's excellent design a few mm taller, and put a slight angle in it to accommodate these 20mm deep lids. It uses the same size screws.
I also include a trivial remix I used for heavy duty hooks to hold the ironing board to the cupboard door. This one needs supports to print.
License
Pot lid 20mm remixes
by Cromlyngames is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
最新模型
-
适用于 1:10 模型的 DKS-Basic 轮毂2024-05-08 -
打印式面板 - 盒连接器2024-05-08 -
HO比例石墙材质2024-05-08 -
三菱迷你分体机遥控器2024-05-06 -
GVDA焊接防护盖2024-05-06
最热下载
-
替换式膨胀喷嘴，适用于FLEXTAILGEAR小型泵。2024-03-18 -
超越IPD板2024-05-03 -
沙箱建筑模型2024-05-08 -
Enders 3版控制面板2024-05-08
