VoxLab Aquila 导丝导向器配备过量传感器
Voxelab Aquila Filament Guide with Runout Sensor
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
If you enjoy my designs you can help me by simply installing Temu and joining for free using my Temu Associate link:
https://temu.to/m/u35zqoy1w8m
Not only can you buy 3D printer items and parts needed to make my designs, you also get a really nice discount. Temu ships pretty quickly, the prices are really low, and the quality is very good. The credits I earn from referrals help me buy filament and publish more free useful designs.
I wanted a very clean and compact design that held the ultra cheap runout sensor I purchased and guided the filament with a roller.
This design is very compact, and the filament cannot slip out upon retraction. If your spool holder is close to the edge at the top of your printer, you will not need any other filament guide or arm sticking off the side of your printer.
This uses 3 M3 bolts and a single 608 bearing (standard skateboard/roller skate bearing). The bearing can be any 608 such as 608-RS, 608-XX, etc.. The tolerances are very tight and the roller rolls smoothly.
This is designed specifically for the Voxelab Aquila C2, but should would with the X2. If you use a different filament sensor you will need to adjust to placement of the holes.
No supports are needed for any of the parts. You should print two copies of the pulley wheel, one for each side of the bearing.
If you don't have a Metric bolt set, you should get one. They are cheap and you will use a lot of M2, M3, M4 etc, bolts and nuts with your printer and projects.
As an Amazon Associate, I earn from qualifying purchases.
Here is a nice M2,M3,M4,M5 bolt nut and washer kit on Amazon:
https://amzn.to/44m64XQ
Here is a link to the 608 bearings:
https://amzn.to/3QNCxmR
And here is a link to the filament sensor I used in this project:
https://amzn.to/3YKtdC5
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 v2
- Rafts:No
- Supports:No
- Resolution:0.16
- Infill:60
- Filament brand:
Any
- Filament color:
Black
- Filament material:
PLA
Tags
License
Voxelab Aquila Filament Guide with Runout Sensor
by wyqid is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
猜你喜欢
联系我们
热门推荐
-
Pi游戏机PC箱(适用于冰山型PC箱)Rpi 3, 3B, 3B+2023-03-26
-
汽车模型2024-01-02
-
PI 5型号外壳搭配Pimoroni NVE接口和Waveshare POE帽2024-02-06
-
斯坦利角尺盒插销2024-05-02
-
性感美女3d人像(带基座)2025-07-17
最热下载
-
3D模型:Easier Print LTT螺丝刀拉拔器2024-01-14
-
Arduino或5V继电器控制板固定架2024-04-02
-
幻想磁力2024-05-03
-
厨房水槽滤网过滤器2025-06-05
最新模型
-
泡泡底拖鞋2025-07-17
-
骰子镇的金矿石2024-05-08
-
Mk2 一战菠萝手榴弹(改进版)2024-05-08
-
Taco Bell国际象棋:车棋2024-05-08
-
凯昂格鬼魂钥匙链V22024-05-06