无人驾驶船艇模型

RC boat

2023-08-24 17:45:55

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The boat's flotation devices are meant to be filled with foam.
The cables should be routed through the 8mm carbon fiber tubes that couple the main frame with the flotation devices.
Use tiny brushless motors with 8.5mm spacing between the mounting holes.
6 M3 screws are required for assembling the flotation devices.
Files "hull" and "hullCover" need to be printed twice each.

Print Settings

Printer brand:
Artillery
Printer:
Artillery Sidewinder X1
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Filament brand:
eSUN
Filament color:
White
Filament material:
PLA
Notes:
ABS or PETG is recommended for use outdoors or under the sun's heat.
Boat should not be capsized.
Not designed for use in salt water.

Post-Printing

The flotation devices should be covered in epoxy or fiberglass in order to be waterproof if they are not filled with foam.
The three tabs on the main frame can be cut to size in order to suit the cover using pliers.
Two 8mm diameter carbon tubes are required to mount the two flotation devices to each of the two sides, holes need to be drilled in them in order to route the motor's cables.