燃烧的力量：热力与金属踏板

HEAT Pedal To The Metal The Orange Car

2023-08-24 21:33:38

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a roughly 1:144 scale car that fits the box insert in HEAT: Pedal to the Medal Board Game. This is meant to offer gamers the option to 3d print the orange car from the box art, and/or can use this as a replacement part for any lost or broken original cars.

Please note that printing with filament (I originally had tried this) is pretty tough due to the small scale. Try to rotate the BODY 90 degrees so that the rear of the car is at the bottom and the front part of the car is pointing straight up, I had the best results with FDM printing using that setting.

On a resin printer, this should print up great for you (I am a very new Resin printer but this printed very nicely for me right from the start --- Still messing with support settings but otherwise the model comes out nicely!)