MiSTer FPGA案例

MiSTer FPGA case

2023-08-24 22:55:11

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

MiSTer case based on https://www.thingiverse.com/thing:5393593
I've split the lower case model using meshmixer to fit more modest sized printer beds, then added tabs in Fusion 360 to aid gluing together.
Print lower case halves edge on, vertically per picture.
Print upper case halves edge on, vertically per picture (the print was a bit of a mess, I'll update this once I print out rev 2 which has some tolerancing fixes and some DFM enhancements.

Recreating the top of the case in Fusion 360 to make it customisable. I've uploaded a blank version pre-chamfering and pre-splitting so others can modify as they see fit.

After many top revisions it now takes cherry switches.

I also used 2x5mm LEDs for the activity lights. 1k Ohm resistors work well, you'll have to make up a simple PCB but the LEDs compression fit into the print. Check the photos.

Work in progress.