OnStepX 外壳，专为FYSETC E4型号设计。

OnStepX Enclosure for FYSETC E4

2023-08-24 23:49:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a case / enclosure for OnStepX using the popular Fysetc E4 board. It has provisions for four RJ45 jacks to connect the motors (RA, DEC, Focuser, Rotator). It has three holes for mounting 5.5mm barrel connector jacks for 12/24v input, as well as two switched outputs (dew heaters). It has a square mounting pattern to attach to common mounting brackets, such as those designed by Chad Gray. I'll eventually include my own.

Things you'll need:
Assortment of M3 cap screws
(4) RJ45 jacks, as narrow as you can find.
(4) 2.54 Dupont or XH2.54 pigtails
(3) 5.5 x 2.1 power jacks
Misc hookup wire
Fysetc E4 board

Please note:
The photos of the enclosure were from a previous revision. This revision is slightly taller to accommodate space for mounting bracket screws under the main board. It also has added ventilation.