Ikayu水杯盖子

Ikea Jug Lid

2023-08-25 01:37:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I'm certain a lot of people have one of these hanging around and if you do the platic in the lid has almost certainly degraded by now. I made this whilst at my in-laws whilst on holiday and its still a small work in progress as it is yet to be test fitted.

Would reccomed to print in PETG for its water resistant properties and lower porosity than PLA.

Print Settings

Printer brand:
Creality
Printer:
Ender-3 S1 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
20%
Filament brand:
SUNLU
Filament color:
White
Filament material:
PETG

How I Designed This

I grabbed the old and slightly knckered lid and measured it with an old an slightly knackered tape measure. Fortunately the tollerances are pretty slack so relatively certain it should fit.