LTT螺丝刀家庭版

LTT Screwdriver At Home

2023-08-25 04:31:29

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Wanted to try to replicate the LTT screwdriver. Everything is very similar if not the same to the original LTT screwdriver. I will be leaving a link to the magnets I used (recommend getting even stronger ones for that satisfying bit storage pull) as well as a link to the ratcheting mechanism I used.

For the bits holder, you would need to print both files named Bits_Holder_P1 and Bits_Holder_P2 because one is shorter than the other to allow for the bit holder ring to fit in between the two. This is to allow the choice of using standard bits because the bits from the LTT screwdriver are shorter than standard bits.

Feel free to leave any questions or tips for improvements. I am still trying to work on a better version for the bit holder that is more like the original.

Link to Ratcheting Mechanism:
https://www.amazon.com/dp/B075GZDMZB?psc=1&ref=ppx_yo2ov_dt_b_product_details

Link to Magnets Used (recommend stronger ones):
https://www.amazon.com/dp/B0BVXXXCJF?ref=ppx_yo2ov_dt_b_product_details&th=1