Cling Wrap Dispenser with Teeth

2023-08-25 06:44:08

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This remake is intended for the smaller rolls of plastic wrap that you get in a supermarket with flimsy cardboard.

A handy holder for your plastic wrap, perfect for keeping your kitchen or pantry organized, especially if the cardboard box for your rarely used plastic wrap is destroyed or if you end up ripping 3 feet of plastic wrap into a hopeless plastic rope trying to tear off enough for a plate because the teeth on the box are useless.

You will need to edit the roll holder for whatever brand of plastic wrap you use. Ours has about 3cm of cardboard on the edge. I used Tinkercad to build the one I have to securely center and "latch" the roll in place. The roll hole should move freely or with little friction, but the outside is sized to require a little effort to push into place.

The teeth are compatible with the original make of this roll holder, so if you have a larger plastic wrap roll that the original design was meant for, please make the original and use the teeth from this design.