90度螺丝刀专用收纳盒（或其他小部件）

Box for 90 degree screwdriver (or other small parts)

2023-08-25 17:34:58

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

UPDATED 8/28/23
Changed the latch slightly so that it doesn't come to a sharp point, but is flattened on the end. It was too hard to open/close the one I printed, so I had to file mine down a little.

3.3" x 4.5" box for my 90 degree screwdriver and bits. This is the same print in place hinge design I used in my Step Drill Bit Holder - https://www.thingiverse.com/thing:6160392

I printed this in PETG and you can see in the picture that one corner warped up slightly while printing. That's why it looks a little funny on the left hand side. But it will work for me. Hopefully your print comes out better.

I added my initials to the latch on the one I printed for myself. If you want your initials or something else just let me know and I can send you an STL for that.

If you print this please post a comment or upload a "make". I'd love to see what I've designed helping someone else.