Glasses Stand

Glasses stand

2023-08-25 22:14:36

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This make is a glasses stand that has been designed as either freestanding or for attachment to a base/object of your choice. The stand should accommodate any style of glasses that have folding ear arms. It has two reducing frame support bars at the front (covered in green baize) so that only the frame ever touches the stand, the lenses are thus protected from scratching. On the reverse there are x2 passive retainers to hold the arms of the glasses on the rear supports, which aids stability and security.
Version 1 is a free-standing glasses stand on a chevron base. It prints without supports (but if you are printing in PLA, it does benefit from a brim – included in the PLA gcode)
Version 2 allows you to mount the glasses stand on a base (or object) of your choice. It is secured to the custom base with 3 x M3 (12mm) bolts at a centre spacing of 15mm (inserted from below and through the base). In my example the glasses mount has been placed onto a grabber that allows it to sit on top of my bedside lamp (where my glasses used to ‘balance’).
G-code provided for PETG and PLA for both V1 and V2. IV2 requires you to design / adapt your own base. Stl provided.