瓷砖膨胀胶块模具或工具（防止在缝隙中留下凹痕）

Mold for Tile Caulking Block/Tool (prevents Indentations in Grout)

2023-08-25 23:50:06

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

1st Photo=Caulking Tool, 2nd Photo=Assembled Mold (4 pieces)

This tool is designed to allow you to caulk tiled surfaces without defects caused by grout lines. This tool skips over the grout lines with its unique shape. This tool has a 6mm side and a larger 8mm side so you can pick how big your grout lines should be. It's similar to the METEX Caulking Tool https://www.youtube.com/watch?v=fAppNjIdqzw but instead of 45 degree angle, this is curved!

This is a mold for the tool, you can use Sugru, OoGoo, or make your own silicone putty by combining 100% silicone caulking, corn starch, and food coloring (optional). Many videos exist on how to make the formula on Youtube. I typically make my putty mixture, then fill the mold sections throughly. I fill the bottom of the mold, then add the middle section, fill the middle, then fill the top then mash them together, the hole on the top relieves the excess silicone to be used for other projects. Screw together with cheap flat head screws (drywall screws work fine). Within 1-2 hours the silicone has cured and the mold can be disassembled. I don't need any mold release, the putty is already setup to release easily. just cut away the flashing with a razorblade.

I recommend printing this part at high resolution so you get a better quality finish.