四块X翼战斗机二维壁画艺术品

4 Piece of X-wing fighter 2D wall art

2023-03-26 16:46:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

I really liked klein_bottle's x-wing, but didn't want to attempt gluing/taping, and wanted something bigger than my 3D printer could print as a complete file. So I Tinkercad'ed this into 4 pieces that float out past their individual borders.

Scale up to fit your printer's build plate/desired size (you can scale quite a bit because these came out tiny for some reason). But make sure to either not scale Z, or scale it separately to your desired height. I left the z at 100%, which is 2mm.

Depending on your build plate, you may want to use the build plate side as the presented side. If not, you may have good luck with the "ironing" setting in your slicer. You can "mirror" the files in your slicer to get the X-wing facing whichever direction you want to hang it.

Update 16 Mar 2023: liquidshrapnel's keen eyes spotted another issue. File 1 (both small and bigger) has now been corrected as well.

Update 8 Mar 2023:

Corrected an issue in file 3 which was identified by liquidshrapnel (thank you for the heads up).

Also added scaled up versions (labeled "...Bigger") so you don't need to do so much scaling in your slicer.

四块X翼战斗机二维壁画艺术品

朋友，你觉得上面这个模型，属于下面的哪个分类？