Kona 2020 储物箱安装件，内置接口设计
Kona 2020 frunk mounts with integrated grommets
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
These are the models for the frunk mounts with integrated grommets. The preferred material is probably some variation of TPU. I used Superslicer to slice these models with manually drawn supports inside the aluminum bar slot. The supports were about 3 mm wide with approximately 2 mm between support strips. The spacing has to be wide enough to slide in a pair of pliers and remove the support material. I'm not sure if the height of the parts is correct and I haven't actually installed them on my Kona. I will update this later with the results or adjustments.
Print Settings
- Printer brand:
Biqu
- Printer:
Biqu B1
- Rafts:No
- Supports:Yes
Tags
License
Kona 2020 frunk mounts with integrated grommets
by twistednematic is licensed under the Creative Commons - Attribution license.
猜你喜欢
联系我们
热门推荐
-
Arduino学习工作站2023-03-26 -
复活节小熊猫3D模型2023-03-31 -
3D模型标题：用于把手连接的支架夹具2024-01-08 -
D4 4W太阳能板充电器支架基础2024-03-25 -
TGV上部密封环 Subaru LGT 05 - 092024-04-15
最热下载
-
二十面体骰子模型2024-03-29 -
罗宾：不公正22024-04-07 -
克利普施 Promedia 2.1音量Pod模拟机器架（铝制支架）安装基座2024-04-29 -
街用迷你四驱车轮子2024-05-01 -
泰坦电视核心升级，升级版泰坦巨人核心2025-07-16
最新模型
-
尼琳替换式烤架2024-05-08 -
CQC 6XX耳机改装模型2024-05-08 -
Taco Bell国际象棋：车棋2024-05-08 -
2x4工作台2024-05-08 -
Gutter Spike Tent Stake widget2024-05-06