森丰达10.1寸显示屏箱体/外壳壁装或独立型

Sun Founder 10.1" Display Screen Case / Enclosure Wall Mount or Free Standing

2023-08-26 05:36:33

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a nice simple screen mount case for the Sun Founder 10.1" screen, typically used with a raspberry pi.

It has slotted holes for mounting it to the wall but it also works well as a free standing case.

The two halves of the case slide over the screen via the grooves in the case which provides a nice snug friction fit and it only adds 2mm to the top, bottom, left and right dimensions as seen from the front.

It gives enough space behind to include the Raspberry Pi board and cables and includes 3 outlet options for the power cable.

Requires supports to be enabled when printing but there is only a very small amount required if you print it with the side faces of the case touching the build plate.

Prints easily with my standard FDM printer, but I couldn't get it to work properly with my resin printer as it was too close to the maximum size.

Also included is a light shield that specifically covers up 2 particularly bright led lights that are on the screen control pcb. I added this as my whole case was glowing green!