包装机械盖子夹锁模块3D模型

Packit Mod Lid Latch

2023-08-26 07:48:55

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a replacement latch for the PACKIT Mod food containers found on Amazon like the one found here: https://a.co/d/65HOtWC One of our latches broke and my wife kept bugging me to make and print a new one. So don't thank me, thank her. :)

My printer is properly tuned and can print with high accuracy. If yours is too, you should have no problem printing with the flat side down and no supports. Obviously print with 100% infill. I think it took like 45 min. to print on my printer at 50mm/s.

I haven't tried printing in PLA. If you can print in PETG, I would recommend that. ABS would be good too but if I remember correctly, PETG is generally considered "food safe".

Print Settings

Printer brand:
Creality
Printer:
CR10S PRO
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.2
Infill:
100%
Filament brand:
eSUN
Filament color:
Black
Filament material:
PETG
Notes:
Harder, more durable plastics should be used with things like this. A well tuned printer should be able to accomplish this print with no supports, just lay it on it's back.

Post-Printing

Tip: Installing onto the lid

When installing on your lid, it's a tight fit as it should be. To make things easier, I found that bending the lid allows the pegs to slide into place. Those pegs are tiny and I imagine could snap under pressure, although that never happened to me.