王国死亡卡牌盒V2.0

Kingdom Death Card Boxes V2

2023-08-26 10:41:56

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Kingdom Death: Monster - Card Boxes V2

V2 Notes

These deck boxes are an updated design of my previous KDM card boxes. They are primarily a remaster as I transitioned to a new modeling program for a much more robust and user-friendly modeling experience. However, this came with a trade off of a significantly less user-friendly automation API, and compromises had to be made.

One of these compromises is that every lid is now accompanied by a paired box file, even if the box is identical to another box. This is a result both of the new export process and also accommodating new card sizes as I've included boxes that manage all sizes of art cards as well as the Knowledge cards and Bone Eater cards from the Gambler's Chest.

Similarly, due to a few tweaks and improvements, these box lids are not compatible with the V1 boxes, but I have left the V1 files available should anyone wish to use those instead or replace broken components from older boxes.

One particular improvement made over the V1 boxes is that the tolerances are more consistent, so doing post-print sanding should no longer be an issue provided you generally stick with the print settings I have used.

Description

Showdown boxes are intended to hold the following monster cards: Hit Location, AI, (Strange) Resources, Hunt Events, and additional specialty cards for the monster like Atnas's Sword Craft cards. They are not designed to hold all cards from an expansion, though printing at a large box might allow you to do so, even with thicker sleeves.

The sleeves that these boxes were designed around are the Sleeve Kings 60 micron sleeves. If you are using a brand that is thicker, like Paladin for example, you will need to print boxes of a size larger than those listed below for some. In general though, if you are using 60 micron sleeves or unsleeved cards, the smaller boxes are for you. If you like premium thickness sleeves (100 micron), you may be able to get away with smaller deck boxes, but it'll be up to you to determine your preference.

The boxes are labeled based on the thickness of the deck they are intended to fit. If you're uncertain about the size of box you need to print, simply measure the deck you intend on putting in the box. For example, a lid or box with 36mm in the name should hold a deck 36mm thick comfortably. The one exception to this is the Bone Eaters box as it has a compartment in the box for holding the smaller cards as well.