低多边形美国秋田犬太阳灯

Low Poly American Akita Solar Lantern

2023-08-26 21:43:10

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a remix of DiirtySanchez's "Low Poly American Akita" to turn it into a solar-powered lantern.

The hole and PCB holder are designed around the cheap solar lights that are advertised as "solar garden lights" on AliExpress etc. They have a ~24mm solar panel and a board based around the common YX8018 chip. The guts of one of those lights can be installed directly into this print to make a nice lantern.

Potential modifications include swapping the LED to a different color, and changing the inductor to a different value to adjust the brightness. I found printing with glow-in-the-dark filament and using a UV led produced a neat effect.

The solar panel can be a tight fit depending on the filament and printer settings, so there's a hole under the tail to allow you to poke it free with a stick.

Without some sort of sealant around the panel, or some sort of additional coating on the board, the electronics are likely to corrode from moisture. The hole under the tail allows some drainage for water that does get in, but it's probably best to keep it dry.