Paracord球形钥匙扣装饰品

Paracord ball keychain

2023-08-26 23:19:27

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Ball shaped keychain looking like an object made of paracord. The ball is hollow. Diameter 42 mm (1.65 inches). This is an easy print. The ball comes in two parts which must be glued together. There is a 4 mm hole to fix a string.

Print Settings

Printer brand:
Flsun
Printer:
Flsun V400
Rafts:
No
Supports:
No
Resolution:
0.2 mm initial layer, 0.2 mm layer height
Infill:
10 %
Filament brand:
TINMORRY, ESUN, RED
Filament color:
Light skin, olive green, orange
Filament material:
PLA
Notes:
No supports required. Just do not go crazy fast to print the fine details nicely. I have chosen a maximum of 70 mm/s.

Post-Printing

Fit a string through the hole of the lower part and add some knots to fix it. Glue the two parts of the ball together. Use a rubber band to hold the two parts together till the glue is hard. Make sure that the parts align perfectly.