ViFly 蜂鸣器 2 Holder - Nazgul 5 V3 框架
ViFly Buzzer 2 Holder - Nazgul 5 V3 Frame
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
IMPORTANT! This only works if your camera is mounted infront of its usual mount as in my case, caused by my analog camera not fitting in the usual camera holder.
Since there are no print-files for the Nazgul 5 V3 frame, I have decided to create my own simple BuzzerHolder for the ViFly Buzzer 2. Feel free to use and remix it.
The Holder will sit on the same position at which the in the frame kit included holder would sit and uses those M1.6 screws to hold in place. I used black PLA but I am sure TPU could also work just fine. Enjoy!
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 v2
- Rafts:No
- Supports:No
- Resolution:0.2
- Infill:20%
License
ViFly Buzzer 2 Holder - Nazgul 5 V3 Frame
by JakobSchalow is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
相关内容
![[JENO] 支持Vifly Finder 2 et Condo 10mm](https://www.3dsjs.cn/api/utils/resourcehub?time=1767824531&url=http%3A%2F%2Flocalhost%3A9898%2Fsandsjs%2Fimage%2F6%2F2%2F621085f1f7fbab896a46ac1506afc11d.webp&signature=2c043dfd49a428eb34cd25bd9c765608)
联系我们
热门推荐
-
Heelys插件（中型）2023-03-27 -
平滑的脑科学奖2023-03-27 -
Icom IC-705天线架2023-04-07 -
坚固盒子 for HDZero2023-05-01 -
Gaggia Brera Coffee Machine Hopper Extension2024-03-17
最热下载
-
Glock 17/34 Solidworks 模型文件2023-04-21 -
高尔夫球支架 / 展示架 / 陈列架 / 收纳架2024-03-29 -
GLOCK 17型手枪2024-05-03
最新模型
-
Flick 19E（增强型） - 可使用的玩具枪 - 类似弹弓的橡皮筋枪2025-08-21 -
丰田22RE发动机Starer电机2025-08-08 -
碧奇公主；桃子公主；水蜜桃公主2025-07-16 -
原神优菈2025-06-27 -
坏龙家的大宝贝女生别下2025-06-26