Casio手表腕带环
Casio Watch Strap Loop
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
The free loop on my casio broke recently so I needed a replacement. I've worn this part 24/7 for the past week so it hasn't broke or slipped off. My casio is a F-108WH for reference.
The interior dimensions are 19.0 x 6.2 mm. I made it 1 mm thick so its flexible enough to fit on the strap but strong enough not to slip off accidentally. The whole thing was extruded at 10 mm.
V3 Can be printed without supports. V2 Needs supports but was made to immitate the original free loop.
I recommend printing with a brim at slower settings to get better results. Infill shouldn't matter too much.
Print Settings
- Printer brand:
Anycubic
- Printer:
Kobra Go
- Rafts:No
- Supports:Yes
- Resolution:0.4
- Infill:15%
- Filament brand:
Anycubic
- Filament color:
Black
- Filament material:
PLA
License
Casio Watch Strap Loop
by Strong_Cat is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
DIY版画压片机 - 开源版画工作坊2023-03-26 -
GepRc Mark4 HD5 O3 准备包2023-06-15 -
3D模型：肩部按钮模块V0.1B2024-03-25 -
雷霆路：复仇基地全地形模型2024-03-31
最热下载
-
Voith Schneider 螺旋桨 VSP2023-04-11 -
Glock 17/34 Solidworks 模型文件2023-04-21 -
猫咪零食球2024-03-29 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
HGX lite v2支架2025-07-18
最新模型
-
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
性感美女3d人像（带基座）2025-07-17 -
兔女郎半身像2025-07-15 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24
