Heos 1壁挂式

Heos 1 Wall Mount

2023-03-26 11:42:41

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

I found Enur123's Heos 1 wall mount here on Thingiverse, and redrew some of it.
nI made it 100% 3D printable. No extra parts needed.
nBoth the M4 and UNC 1/4-20 bolt is used on the Heos 1 speaker and is 3D printed.

I printed mine on a heavily modified Ender 3, with a textured PEI bed. Filament is in 3DE MAX which is some sort of PLA+ / "ECO ABS".
nI dont know if I would print this in regular PLA. Neither do I know the longevity of this print yet. Maybe Enur123 can weigh in, he must have had one hanging in 3-4 years by now.

It can be a bit tricky to put together, since you have to stick the "WallMountBolt" through the top hole, and the run 2 of the nuts on before going through the bottom hole and putting on the last nut. I tried printing this with 2 smaller bolts and 2 nuts instead, but I prefer the stiffness this "all-the-way-through" bolt gives to the print.

Heos 1壁挂式

朋友，你觉得上面这个模型，属于下面的哪个分类？