袋子夹克 10

Bag Clip 10

2023-08-27 12:29:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Yet another bag clip. Here is a useful bag clip that tightly closes a folded plastic bag or similar. This design is printed as a single part.

My design does not use much filament and comes in three sizes. The three clip sizes included with clamping sizes of 60, 90 and 120mm, respectively.

I experimented printing the clips in PETG and PLA+. Both gave what appeared to be quite pliable and usable clips. I did notice that the PLA+ got more brittle whilst clamping a bag in the freezer and breaking. In the end, it comes down to your intended use case. PETG being the most robust of the two filaments I tried.

My prints are made with eSUN PETG 1.75mm Orange filament, with 0.2mm layer height and 15% infill on a Bambu X1 Carbon printer. No supports required.

I hope you can find this print useful, too.

Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

UPDATES
07/12/2023 Added 120mm clip.