线圈托盘（松紧度较低）

Wire Spool Holder, Less Tight

2023-03-26 16:51:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

这些混合部件提供了一个略微松一些的宽度容忍度，用于刹车部分安装槽，以及较薄的墙壁，适用于那些看起来有点紧密的线圈。为了确保你的打印部分不会太紧，我就像我的那样。

I really like the remix "Spool holder box" by Azuzula. The "brake" provides just enough tension on the spools to keep them from unraveling, and the spools don't fall out. I also like the reduced part count and the 45-degree angled sides (to reduce filament usage and print time).

However, (possibly due to printer calibration tolerances) I was not able to insert the brake part onto the body tab of my printed parts - I needed just slightly more looseness on the brake mounting slot. Also, the spacing between body modules was a bit tight for the wire spools I was using - the spools were keeping the body parts from fully fitting together, and more friction tension was being applied to the spools than what the brake provided.

So, I tried modifying the STLs to change tolerances just slightly, for at least my printer. CAUTION! - I do not usually modify STLs directly, so I do not have the tools or knowledge to do this well. I muddled through, but the STL for the body did not cooperate, and has a flaw in the brake mounting tab that I cannot fix . I adjusted for this flaw in my loosening of the mounting slot in my version of the brake part, so my brake part seems to work fine with either Azuzula's original body, or with my modified version - at least on my printer.

I also punched a hole in my body part, to reduce filament usage and print time further. The STLs include two body parts (with thinner walls for spool tolerances), one with the hole and one without the hole. I use the solid version on the outside of the rack, and the one with the hole for the inside spools. You still need Azuzula's end blank piece for the other side.

For the brake part, supports are needed (I found Cura-generated supports to be easier to remove than the original part's built-in support).

I know these parts may not be perfect, and that others more skilled in STL mods could probably do better. But perhaps someone might find these mods useful.

Also, I did find that stacking these racks reliably can be difficult. So I designed a pair of legs to provide solid stacking of these modular wire spool holder racks. These legs are available at https://www.thingiverse.com/thing:5415292.

线圈托盘（松紧度较低）

朋友，你觉得上面这个模型，属于下面的哪个分类？