易拍 Z 轴摄像机 SV06

Easy Snap on Z Axis Cam SV06

2023-09-06 19:22:31

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

9/12 Update
I added a longer, 90mm shaft for more adjustment and improved the set bolt.

I came up with this to mount a pi camera, or any other camera to the Z axis of the Sovol SV06. It clips on to the plastic motor mount and is very stable. The arm retracts in and out. I included several variations of the mount. I chose to print mine with 2 sockets. If you only want one I included files for lower offset mounting position higher offset center and double socket. I will be uploading a longer tube and possibly some additional optional attachments.

I Included the Pi camera case I used, https://www.thingiverse.com/thing:4960841 for the IMX219 with the M12 wide angle lens.

Print Settings

Printer brand:
Sovol 3D
Printer:
Sovol SV06
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
25%-100%
Filament brand:
Elagoo
Filament material:
PLA+
Notes:
I use infill touching the build plate only set to 80 degrees. The parts with the ball end and compression nut need to be printed with the flat of the ball on the build surface. The infill will pop out of the ball joint with a little patients. All Parts Should be 100% infill except the Mount clip itself. I printed it at 25%