陶瓷溅水盘

Pottery Splash Pan

2023-09-06 19:23:18

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Pottery Wheel Splash Pan

Features:

No Supports Needed: This splash pan is designed for printing without the need for additional supports, ensuring a smooth and efficient 3D printing process.
Easy Assembly: To create a complete circle, print 8 separate pieces. Simply use the 'center' piece and glue them together. (Includes 8x center pieces)
Divisible Design: Alternatively, assemble a divisible splash pan using the 'start' and 'end' pieces along with 4 'center' pieces. (Includes 2x start pieces, 2x end pieces, 4x center pieces)

Dimensions:

Interior diameter: 43cm (17")
External diameter: 50cm (19.6")
Upper hole diameter: 22cm (8.6")
Lower hole diameter: 26cm (10.2")

Printing Tips:

Material: PETG
Hotend Temperature: 250°C
Heatbed Temperature: 90°C
Wall Thickness: 4 layers
Infill: 15%
Fan Usage: It's recommended to increase fan speed during the final layers of your print for optimal results (approximately 30%).

Finishing Tips:

For a professional and polished look, consider the following finishing steps:

Filler: After assembly, apply filler to the seams and any imperfections to achieve a smooth finish.
Sandpaper: Gently sand the entire surface to remove rough spots and create an even texture.
Primer: Apply a primer coat to prepare the surface for painting, enhancing adhesion and longevity.
Water-Resistant Paint: Finish with water-resistant paint of your choice to protect your splash pan from moisture and improve its appearance.

Personal Experience:

I successfully printed this splash pan for my pottery projects using PETG filament with a hotend temperature of 250°C and a heatbed temperature of 90°C. I opted for 4 layers of walls and an infill of 15% to strike the right balance between strength and efficiency. Additionally, increasing fan speed during the final layers improved the overall print quality.